A Mechanical Engineering Training Course

Why Choose this Training Course?

Grab the opportunity to attend an exciting course that equips you with all the necessary knowledge to enter the world of valves and actuators. The workshop is highly interactive, and is suitable for all delegates, regardless of their background. Whether you are part of the team purchasing the valves, or a key member involved in implementing maintenance activities, or a process control specialist, this is the one course that you should not miss out on! Valves, actuators, associated equipment, process control using valves – this and much, much more are covered in 5 knowledge-filled days.

The training course focusses on applications and examples deemed to be relevant to your industry and is cognizant of your working environment. At least 50% of the workshop is devoted to practical exercises and discussions, to keep attention spans at optimal levels.

[]
1 Step 1
Full Name
Occupation
Phone Number
Your Interested Courses
Further Inquiry
0 /
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right
[]
1 Step 1
Full Name
Phone Number
Preferred Location
Course of Interest
Preferred Session
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right

Process Equipment & Piping Systems

Why Choose this Training Course?

This Process Equipment & Piping Systems training course is designed to provide practical aspects of the mechanical design of pressure vessels, storage tanks, thermal equipment, piping systems and fluid transport machinery. This training course will discuss the performance of these components under various operating conditions including in-depth explanation on the process of material degradation such as corrosion, erosion, fatigue and others that may lead to component failure.
Several examples and case studies included in the workshops and will demonstrate the application of Fitness for Service (FFS) assessment method that enables quantitative evaluation of the remaining life in service of any component of equipment. Failure prevention methods will also be discussed and explained.

[]
1 Step 1
Full Name
Occupation
Phone Number
Your Interested Courses
Further Inquiry
0 /
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right
[]
1 Step 1
Full Name
Phone Number
Preferred Location
Course of Interest
Preferred Session
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right

Electrical Faults: Causes, Analysis, Detection & Remedies

Why Choose this Training Course?

This Electrical Faults training course in Dubai teaches practical electrical troubleshooting and is concerned with the calculation of fault currents in electrical power systems. Short-circuit currents are associated with large amounts of very destructive energy and therefore calculations must be made to ensure that the short-circuit ratings of equipment are adequate to cater for these high currents. Accurate assessment of these currents is also essential for determining the settings of the system protection devices.

This training course includes the preparation of the system for analysis, by manual calculation and by the use of computer analysis. Participants will be introduced to the various fault analysis software programs.

[]
1 Step 1
Full Name
Occupation
Phone Number
Your Interested Courses
Further Inquiry
0 /
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right
[]
1 Step 1
Full Name
Phone Number
Preferred Location
Course of Interest
Preferred Session
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right

Medium Voltage & High Voltage Switchgear Operations & Maintenance

Why Choose this Training Course?

This training course will present a comprehensive capsule of all the knowledge essential for the medium voltage and high voltage switchgear operations and walk the participants through the switchgear design process using a set of interlinked case studies. The training course focuses mainly on the operation and maintenance of distribution equipment namely transformers, circuit breakers, contactors, isolators and disconnectors (this will also include the auxiliary peripherals and control circuits).

Medium and high voltages switchgears are the integral component of any electrical distribution system; hence, the selection and installation of these switchgears are vital so as to provide protection and safe distribution of electrical power. The equipment needs to be operated in a safe manner securing continuity of supply to consumers.

[]
1 Step 1
Full Name
Occupation
Phone Number
Your Interested Courses
Further Inquiry
0 /
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right
[]
1 Step 1
Full Name
Phone Number
Preferred Location
Course of Interest
Preferred Session
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right

API 570 Piping Inspection Training

Why Choose this Training Course?

The API 570 Piping Inspector Certification Preparation program is designed to equip individuals with broad knowledge base relating to maintenance, inspection, alteration and repair of in-service metallic piping systems.

This program benefits employers and the industry as a whole by helping to:

  • Provide a continued high level of safety through the use of inspectors specialized in process piping
  • Improve management control of process unit inspection, repair, alteration and rerating
  • Reduce the potential for inspection delays resulting from regulatory requirements
[]
1 Step 1
Full Name
Occupation
Phone Number
Your Interested Courses
Further Inquiry
0 /
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right
[]
1 Step 1
Full Name
Phone Number
Preferred Location
Course of Interest
Preferred Session
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right

ASME B31.3 Process Piping Design Code

Why Choose this Training Course?

This training course will focus on learning the ASME B31.3 for Pressure process piping for the design, materials examination, testing and nonmetallic piping. This training course further provides an introduction to the different parts of the ASME B31.3 Standard and will cover all requirements for safe design, construction, inspection, testing, operation and maintenance of liquid pipeline systems.

The ASME B31.3 Code focuses on the requirements for process piping related to the design, construction, fabrication, inspection, examination in a safe and economical piping system.

[]
1 Step 1
Full Name
Occupation
Phone Number
Your Interested Courses
Further Inquiry
0 /
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right
[]
1 Step 1
Full Name
Phone Number
Preferred Location
Course of Interest
Preferred Session
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right

ASME B31.8 Gas Transmission and Distribution Piping Systems

Why Choose this Training Course?

This training course provides the requirements for the design, fabrication, installation, testing and safety aspects of operation and maintenance of gas transmission and distribution piping systems including gas pipelines, gas compressor stations, gas metering and regulation stations, gas mains, and service lines up to the outlet of the customer’s meter set assembly.

Furthermore, the requirements of ASME B31.8 applicable to the elements of piping systems, including but not limited to pipe, valves, fittings, flanges, bolting, gaskets, regulators, pressure vessels, pulsation dampeners, and relief valves are exhaustively

[]
1 Step 1
Full Name
Occupation
Phone Number
Your Interested Courses
Further Inquiry
0 /
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right
[]
1 Step 1
Full Name
Phone Number
Preferred Location
Course of Interest
Preferred Session
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right

Corrosion Control in Gas, Oil and Water

Why Choose this Training Course?

The production of gas and oil is often accompanied by water and acid gases, such as (H2S) and (CO2) are often present in produced fluids. These increase the corrosivity of the process, which can significantly impact the safe operating life of pipes and equipment. Additionally, the build-up of corrosion and bacterial by-products on the equipment walls can cause problems with the equipment’s operation.
The potential consequences of internal and external corrosion represent both safety and economic concerns to various sectors of the industry. Corrosion is fought by a complex system of monitoring, preventative repairs and careful use of materials.
This intensive course examines the types of corrosion and corrosion control in the gas, oil and water industry and provides an overview of specific process descriptions, and focuses on the examination and identification of metallurgical problems in process units and methods of corrosion monitoring, control and damage reduction.

[]
1 Step 1
Full Name
Occupation
Phone Number
Your Interested Courses
Further Inquiry
0 /
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right
[]
1 Step 1
Full Name
Phone Number
Preferred Location
Course of Interest
Preferred Session
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right

Electrical Engineering and Introduction to simulation tools

Why Choose this Training Course?

This course provides a whole spectrum of activities in basic electrical engineering practice. Participants will also be exposed to the use of Electrical Transient Analyzer Program (ETAP) for electrical / power systems analysis.

[]
1 Step 1
Full Name
Occupation
Phone Number
Your Interested Courses
Further Inquiry
0 /
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right
[]
1 Step 1
Full Name
Phone Number
Preferred Location
Course of Interest
Preferred Session
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right

Flow Assurance – Principles, Applications and Operation

Why Choose this Training Course?

Flow assurance is the application of multiple disciplines to ensure economic rates of flow from the hydrocarbon reservoir to a production facility over the life of a field and in any environment. A variety of problems can be encountered to the detriment of the piping system and associated equipment.

As an example, multiphase mixtures of oil, natural gas, water and deposits are normally piped between the reservoir and the surface. In addition, the flow regime may change at different sections of the pipeline. All these issues can lead to a multitude of pipeline failures including corrosion, erosion and blockage, etc.

This 5-day intensive Flow Assurance training course provides participants with fundamental knowledge about variety of disciplines that are required to safely and economically transport the process throughout different sections of the piping system. This is particularly beneficial for any company hoping to avoid the high maintenance and failure costs associated with process transport.

[]
1 Step 1
Full Name
Occupation
Phone Number
Your Interested Courses
Further Inquiry
0 /
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right
[]
1 Step 1
Full Name
Phone Number
Preferred Location
Course of Interest
Preferred Session
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right

FLOATING PRODUCTION STORAGE AND OFFLOADING SYSTEM

Why Choose this Training Course?

This course will focus on developing participants with knowledge of Floating Production Storage and Offloading (FPSO) Design, System development, Operations and economics for the development and management of FPSO.

[]
1 Step 1
Full Name
Occupation
Phone Number
Your Interested Courses
Further Inquiry
0 /
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right
[]
1 Step 1
Full Name
Phone Number
Preferred Location
Course of Interest
Preferred Session
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right

Health, Safety and Environment Management Training

Why Choose this Training Course?

This course would give participants a thorough understanding of safety and environmental management process through determining and applying appropriate standards and methods to identify and minimize the likelihood of accidents, injuries and environmental impact during projects and plant operations. Ultimately, the course would equip participants in analyzing and quantifying the hazards and risks to health, assets and environment in any organization’s business processes and help recommend appropriate control measures to reduce risks and guarantee safety of personnel, assets and the environment. It will also serve as an execellent foundational course for NEBOSH and IOSH certification courses.

[]
1 Step 1
Full Name
Occupation
Phone Number
Your Interested Courses
Further Inquiry
0 /
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right
[]
1 Step 1
Full Name
Phone Number
Preferred Location
Course of Interest
Preferred Session
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right

Intelligent Pigging & Mechanical Cleaning of Offshore & Onshore Pipelines

Why Choose this Training Course?

This Intelligent Pigging & Mechanical Cleaning of offshore & Onshore Pipelines training course consolidates the fundamental knowledge and experiences required by pipeline operators to ensure the pipeline network is well maintained throughout the design life and beyond.

The training course bridges the gap between the theoretical and practical understanding of the pipeline safe operation requirements and integrates the operation, inspection, monitoring and maintenance activities within a robust framework that can be easily communicated and implemented.

[]
1 Step 1
Full Name
Occupation
Phone Number
Your Interested Courses
Further Inquiry
0 /
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right
[]
1 Step 1
Full Name
Phone Number
Preferred Location
Course of Interest
Preferred Session
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right

Offshore Structural Design (Jackets and Topsides)

Why Choose this Training Course?

The design of shallow water and deep water offshore installations have been achieved over the years with the application of industry tools. With these tools larger structures have been designed much more quickly with greater accuracy. Knowhow of the effective application of this tools(SACs) are critical to a successful design and evidently project execution.

[]
1 Step 1
Full Name
Occupation
Phone Number
Your Interested Courses
Further Inquiry
0 /
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right
[]
1 Step 1
Full Name
Phone Number
Preferred Location
Course of Interest
Preferred Session
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right

Offshore Structure Design, Construction & Maintenance

Why Choose this Training Course?

This Offshore Structure Design, Construction & Maintenance training course will review the fundamentals behind all types of fixed offshore structures and, in the case of fixed platforms, will cover applications of these principles. The overall objective is to provide participants with an understanding of the design, construction and risk based maintenance for offshore platforms, specifically, the theory and process of such design and the use of current applicable engineering methods in the design of fixed offshore platforms.

[]
1 Step 1
Full Name
Occupation
Phone Number
Your Interested Courses
Further Inquiry
0 /
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right
[]
1 Step 1
Full Name
Phone Number
Preferred Location
Course of Interest
Preferred Session
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right

Pipeline Operations and Maintenance

Why Choose this Training Course?

Pipeline systems for oil and gas industry play important role in modern industrial operations. The purpose of this Symetrika Energy training course is to present basic characteristics of efficient operation of pipelines in various engineering applications.

This training course will cover the interaction of pipelines with flow moving equipment, i.e. pumps and compressors and technical characteristics of operation of pump and compressor stations.

The delegates will be introduced to main points of inspection and testing according to relevant API standards.

They will also develop familiarity with methods of cleaning and other maintenance activities, including necessary repairs as prevention of failures.

The programme will include several workshops with real problems from industrial practice which will enable discussions and exchange of experiences.

[]
1 Step 1
Full Name
Occupation
Phone Number
Your Interested Courses
Further Inquiry
0 /
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right
[]
1 Step 1
Full Name
Phone Number
Preferred Location
Course of Interest
Preferred Session
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right

UMBILICALS, FLOWLINES & RISERS (UFR)(BASIC)

Why Choose this Training Course?

This course is mainly designed to help subsea, pipeline and riser engineers understand risers, umbilicals and flexibles (flowlines) and how they operate.

[]
1 Step 1
Full Name
Occupation
Phone Number
Your Interested Courses
Further Inquiry
0 /
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right
[]
1 Step 1
Full Name
Phone Number
Preferred Location
Course of Interest
Preferred Session
How Did You Hear About Us?
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right